Stress-Deformation Behavior of an Embankment on Boston Blue Clay
An 11 m high I-95 embankment was thoroughly instrumented with piezometers, settlement rods and inclinometers to measure the behavior of the underlying 40 m thick deposit of Boston Blue...
Poorer Is Riskier: Opportunity for Change
With regard to water resources, it is appropriate to build upon two interacting themes of the late Aaron Wildavsky (1988). The first of Wildavsky's themes is the idea of resiliency. The...
Waste Minimization and Recycling by Microfiltration during Nitrocellulose Manufacturing
A plant survey was conducted to determine the amount of nitrocellulose (NC) discharged with process water from each of five sequential NC purification processes. Wastewater samples were...
Pilot Test on Groundwater Organics Removal by Low-Pressure Membranes
A 1-year membrane pilot study has been performed to evaluate disinfection-byproduct (DBP) precursors and color removal by low-pressure membranes from groundwater with color values up to...
A Probability Based Approach to the Design and Operation of Soil Vapor Extraction Systems
Soil vapor extraction (SVE) or soil venting is related with Monte Carlo simulation of critical soil characteristics. The correlation yielded a probability based nomograph that may be utilized...
A comparison between computed and measured bed evolution in a river bend
A shallow-water scheme with a movable bed has been employed in order to check the reliability of computations related to the bed evolution when a substantially three-dimensional phenomenon...
Measurement of Turbulent Properties in a Natural System
Instruments designed to measure flow properties in stratified estuaries, lakes and oceans are reviewed. Emphasis is given to the measurement of turbulent fluxes and recent developments...
A Computerized Open Channel Flow Measurement Device
This is a technical information paper with the intention of introducing a new product. It is not the intent of the author to use this as a marketing tool. However, it is the intent to...
Laboratory and Field Evaluation of Acoustic Velocity Meters
A project is currently underway to evaluate the performance of 27 acoustic flowmeters used at Hoover, Davis, and Parker Dams on the lower Colorado River. Field surveys and laboratory testing...
Mapping 2-D and 3-D Velocity Components in Circular Conduits Using an Electromagnetic Current Meter and a 5-Hole Pilot Probe
The techniques presented in this paper facilitate the visualization of the two-dimensional and three-dimensional flow fields at arbitrary sections in a conduit. They have been used to...
Velocity Measurements by the One-Orange Method
Application of the most sophisticated instrumentation - so called state-of-the-art equipment - is not always necessary nor even desirable for measurement of mean velocities in verticals,...
Experimental Design and Measurement Techniques for Investigation of Two-Phase Flow
Discussing the relevant hydraulical and inter-phasial processes of two-phase flow in open tanks the necessary requirements for set-up and operation of physical model studies are worked...
Sediment Measurement Instrumentation A Personal Perspective
The development of the suspended sediment samplers in the 1940s was a major contribution to the science of sedimentation and provided for the proper development of dams, reservoirs, and...
Low-Cost Bridge Scour Measurements
This paper reports on the use of a low-cost, highly portable sonar system. The ease of use of the instrument and the short time required to make measurements should make this system valuable...
Using the SedBed Monitor to Measure Bed Load
An acoustic distance measuring device (SedBed Monitor) was developed to accurately measure bed surface transects in a sediment and water recirculating flume. From these transects the rate...
An Investigation of Turbulence in Open Channel Flow via Three-component Laser Doppler Anemometry
A three-component laser Doppler anemometer is used to reexamine the distribution of single-point mean statistics in a nearly uniform fully-developed 2D turbulent open channel flow of water...
Hot-Film Response in Three-Dimensional Highly Turbulent Flows
A methodology is described for accurate turbulence measurements with hot film or hot wires even at turbulent intensities as high as 100%. The assumptions involved and the approximations...
Experimental Study on Turbulent Structures in Unsteady Open-channel Flows
Turbulence measurements in unsteady open-channel flows over smooth beds were conducted accurately by the simultaneous use of two-component LDA system and water-wave gauges. In the inner...
Estimation of Mean Velocity for Flow Under Ice Cover
Methods of estimating mean velocity in a vertical from point velocity measurements are compared for an ice-covered channel. The comparison is based on velocity profiles obtained from a...
Effects of Simulated Ice on the Performance of Price Type-AA Current Meter Rotors
Slush ice readily adheres to the standard metal rotor of the winter Price type-AA current meter and affects the ability of the meter to measure the flow velocity accurately. Tests conducted...
Return to search